f eatures actf9160 - 915.0 - dcc6c ? low - loss rf filter for mobile systems ? low amplitude ripple ? no matching network r equired for oper ation at 5 0? ? c eramic p ackage for s urface m ounted t echnology ( smt ) ? lead- free production and rohs complian t p ackage dimension s ceramic package: dcc6c pin configuration 2 input 5 output 1, 3, 4, 6 ground m arking top view, laser marking " a ct ?: manufacturer?s mark ?f ?: saw filter ?9160 ?: part number maximum ratings rating value unit input power level p 10 dbm dc v oltage v dc 12 v operating t emperature r ange t a -45 ~ + 125 c storage t emperature r ange t stg -45 ~ + 125 c - 1 -
e l ectrical characteristics item minimum typical maximum unit center frequency f c 915 mh z insertion loss il 91 4.0 ? . 91 6.0 mhz -- 2.5 3. 0 db absolute attenuation 0.300 0 ?. 452 .00 mhz 45 47 db 452 .00 ?. 806 .00 mhz 40 44 db 806 .00 ?. 849 .00 mhz 40 43 db 849 .00 ?. 894 .00 mhz 38 43 db 894.00 ? . 896.00 mhz 40 48 db 896.00 ? . 901.00 mhz 35 40 db 901.00 ? . 902.00 mhz 30 38 db 929.00 ? .930.00 mhz 35 55 db 930.00 ? . 932.00 mhz 40 55 db 932.00 ? .935.00 mhz 40 55 db 935.00 ? .1900.00 mhz 35 38 db amplitude ripple (p - p) 91 4.0 ? . 91 6.0 mhz ? 0 .5 1.2 db group delay variation 91 4.0 ? . 91 6.0 mhz 20 60 ns input / output impedance (nominal) 50 ? rohs c ompli ant e lectrostatic sensitive device typical frequency response - 2 -
- 3 -
s tability c haracteristics test item condition of test 1 mechanical shock (a) drops: 3 times on concrete floor (b) height: 1.0 m 2 vibration resistance (a) frequency of vibration: 10 ~ 55hz (b) amplitude: 1.5 mm (c) directions: x,y and z (d) duration: 2 hours 3 moisture resistance (a) condition: 40c, 90~95% r.h. (b) duration: 96 hours (c) wait 4 hours before meas urement 4 climatic sequence (a) + 70 c for 16 hours (b) +55 c for 24 hours, 90~95% r.h. (c) - 25 c for 2 hours (d) +40 c for 24 hours, 90~95% r.h. (e) wait 4 hours before measurement 5 high t emperature e xposure (a) temperature: 70c (b) duration: 250 hours (c) wait 4 hours before measurement 6 thermal impact (a) +70c for 30 minutes ? - 25c for 30 minutes repeated 3 times (b) wait 4 hours before measurement requirements : the saw filer shall remain w ithin the electrical specifications after tests. - 4 -
remarks ? saw devices should not be used in any type of fluid such as water, oil, organic solvent, etc. ? be certain not to apply voltage exceeding the rated voltage of components. ? do not operate outside the recommended operating temperature range of components. ? sudden change of temperature shall be avoided, deterioration of the characteristics can occur. ? be careful of soldering temperature and duration of components when soldering. ? do not place soldering iron on the body of compone nts. ? be careful not to subject the terminals or leads of components to excessive force. ? saw devices are electrostatic sensitive . p lease avoid static voltage during operation and storage. ? u ltrasonic cleaning shall be avoided . ultrasonic vibration may cause destruction of components. t est circuit recommended land pattern pa cking information carrier tape reel dimensions - 5 -
o uter packing type quantity dimension description weight carton box 0.85 carton box 2 0000 190190190 1. 80 u nit: mm unit: kg r ecommended soldering profile 1. the specifications of this device are subject to change or obsolescence without notice. 2. typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of t he equipment manufacturer. 3. our liability is only assumed for the surface acoustic wave (saw) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. - 6 -
|
